Keywords
Root Cause Analysis
Improvement Recommendations
FMEA
FTA
How to Cite
Abstract
This study addresses forklift maintenance challenges at PT. Karya Mitra Teknik, focusing on undisciplined operators and overuse issues. Using Failure Mode And Effect Analysis (FMEA) and Fault Tree Analysis (FTA), it identifies root causes and suggests improvements. Data collected through observations, interviews, and flow diagrams pinpoint three priority failure modes: radiator, starter dynamo, and oil flow failure. Recommendations emphasize regular maintenance, cleanliness, and enhanced operational practices for effective issue mitigation.
Highlight:
- Root Cause Analysis with FMEA and FTA.
- Prioritizing Critical Failure Modes.
- Recommend Disciplined Maintenance for Operational Enhancements.
Keyword: Forklift Maintenance, Root Cause Analysis, Improvement Recommendations, FMEA, FTA
References
M. R. Apriady, “Implementasi Metode Certainty Factor Dalam Mendeteksi Kerusakan Forklift Merek Linde Active,” J. CyberTech, vol. 3, no. 4, pp. 603–612, 2020.
D. Pordawan, “Analisa Penurunan Kemampuan Sistem Hidrolik Pada Forklift FD 30,” J. Sustain. J. Has. Penelit. dan Ind. Terap., vol. 10, no. 1, pp. 24–31, 2021, doi: 10.31629/sustainable.v10i1.862.
E. Nursanti, R. M. S. Avief, Sibut, and M. Kertaningtyas, "Maintenance Capacity Planning Efisiensi & Produktivitas," 2019.
Y. Ngadiyono, “Pemeliharaan Mekanik Industri,” Pendidik. Profesi Guru Jur. Tek. Mesin, pp. 1–112, 2010.
M. Nasution, A. Bakhori, and W. Novarika, “Manfaat Perlunya Manajemen Perawatan Untuk Bengkel Maupun Industri,” Bul. Utama Tek., vol. 16, no. 3, pp. 248–252, 2021.
C. T. N. Siregar, P. Kindangen, and I. D. Palandeng, “Evaluasi Pemeliharaan Mesin dan Peralatan Produksi PT. Multi Nabati Sulawesi (MNS) Kota Bitung,” J. EMBA J. Ris. Ekon. Manajemen, Bisnis dan Akunt., vol. 10, no. 3, p. 428, 2022, doi: 10.35794/emba.v10i3.42362.
M. T. Hidayat, P. Studi, T. Industri, F. Teknik, C. Penyok, and C. Bantat, “Gandeng dengan Metode Fault Tree Analysis ( FTA ) dan Failure Mode and Effect Analysis ( FMEA ) di PT . XXZ,” vol. 01, no. 04, pp. 70–80, 2020.
A. Andriyanto and Y. Ega Anggraini Putri, “Analisis Penyebab Kegagalan Pengiriman Barang Project 247 atau Jenis Sxq Pada Divisi Operation Airfreight Pt.Cipta Krida Bahari Dengan Metode Failure Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta),” J. Logistik Bisnis, vol. 11, no. 1, pp. 7–13, 2021, doi: 10.46369/logistik.v11i1.1372.
R. S. Laali, “Analisis Kecelakaan Kerja pada Bengkel Bubut dan Las Wijaya Dengan Metode Job Safety Analysis (JSA) dengan Pendekatan Failure Mode and Effect Analysis (FMEA),” Front. Neurosci., vol. 14, no. 1, pp. 1–13, 2021.
Y. Hisprastin and I. Musfiroh, “Pengertian Ishikawa Diagram (Fishbone Diagram),” Maj. Farmasetika, vol. 6, no. 1, pp. 1–6, 2020.
N. Ardiansyah and H. C. Wahyuni, “Analisis Kualitas Produk Dengan Menggunakan Metode FMEA dan Fault Tree Analisys (FTA) Di Exotic UKM Intako,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 2, no. 2, pp. 58–63, 2018, doi: 10.21070/prozima.v2i2.2200.
F. Sepriandini and Y. Ngatilah, “Analisis Kualitas Produk Koran Menggunakan Metode Six Sigma dan Failure Mode and Effect Analysis (FMEA) Di PT. Xyz Balikpapan,” Tekmapro J. Ind. Eng. Manag., vol. 16, no. 2, pp. 48–59, 2021, doi: 10.33005/tekmapro.v16i2.203.
Y. M. Fitriani, D. Andesta, and H. Hidayat, “Analisis Risiko Kerusakan Pada Mesin Las FCAW Dengan Pendekatan Metode Failure Mode And Effect Analysis (Studi Kasus : PT. Swadaya Graha),” J. Serambi Eng., vol. 7, no. 4, 2022, doi: 10.32672/jse.v7i4.4663.
M. Rinoza, Junaidi, F. Ahmad, and Kurniawan, “Analisa RPN (Risk Priority Number) Terhadap Keandalan Komponen Mesin Kompresordouble Screw Menggunakan Metode FMEA di Pabrik Semen PT. XYZ,” Bul. Utama Tek., vol. 17, no. 1, pp. 34–40, 2021.
S. R. Fauziah, R. Puti, and Selamat, “Identifikasi Penyebab Terjadinya Kecacatan pada Produk Induktor Toroidal dengan Menggunakan Metode Fault Tree Analysis ( FTA ) di,” pp. 91–99.
Lestari and N. A. Mahbubah, “Analisis Defect Proses Produksi Songkok Berbasis Metode FMEA Dan FTA di Home - Industri Songkok GSA Lamongan,” J. Serambi Eng., vol. 6, no. 3, 2021, doi: 10.32672/jse.v6i3.3254.
This work is licensed under a Creative Commons Attribution 4.0 International License.