Keywords
Welding
Manufacturing, Musculoskeletal Risks
Workplace Safety
How to Cite
Abstract
This study examines ergonomic challenges faced by welders at CV. Frontec Agritama Engineering, focusing on catwalk welding. Using Rapid Entire Body Assessment (REBA) and Quick Exposure Check (QEC), ergonomic risks were evaluated. Results showed high-risk levels, urging immediate interventions. Proposed solutions include ergonomic workstations to reduce musculoskeletal injuries. This research contributes to workplace safety and productivity in manufacturing.
Highlight:
- REBA and QEC methods assess ergonomic risks comprehensively.
- Welding activities pose significant musculoskeletal risks.
- Proposed ergonomic workstations enhance safety and productivity.
Keywoard: Ergonomics, Welding, Manufacturing, Musculoskeletal Risks, Workplace Safety
References
F. M. A. Antaqiya, U. Budiarto, and S. Jokosisworo, “Analisa Pengaruh Variasi Proses Preheating Pada Pengelasan SMAW Terhadap Kekuatan Tarik dan Struktur Mikro Baja ST 60,” Teknologi Perkapalan, vol. 5, no. 2, pp. 421–430, 2019.
R. Y. Pratama, M. Basuki, and E. Pranata, “Pengaruh Variasi Arus Pengelasan SMAW untuk Posisi Pengelasan 1g pada Material Baja Kapal SS 400 Terhadap Cacat Pengelasan,” Jurnal Teknologi Perkapalan FTMK-ITATS, vol. 02, no. 1, pp. 203–209, 2020.
S. A. Handayani and E. N. Hayati, “Perancangan Stasiun Kerja Guna Menunjang Kinerja Operator,” Jurnal Cakrawala Informatika, vol. 2, no. 1, pp. 69–79, 2022, doi: 10.54066/jci.v2i1.202.
K. Dani Lestari and Hendra, “Postur Kerja dan Gangguan Otot Rangka Akibat Kerja Pada Juru Las,” Jurnal Ergonomi Indonesiana, vol. 8, no. 1, pp. 30–36, 2022, doi: 10.24843/JEI.2022.v08.i01.p01.
N. Nilamsari and F. Innafin, “Identifikasi Musculoskeletal Disorder dan Penilaian Postur Kerja pada Pekerja Loader Semen di PT Swabina Gatra Identification of Musculoskeletal Disorder and Assessment of Work Posture on Cement Loader Workers at PT Swabina Gatra,” Jurnal Ergonomi Indonesiana, vol. 8, no. 1, pp. 46–56, 2022, doi: 10.24843/JEI.2022.v08.i01.p02.
U. Wicaksono, L. Made, I. Sri, and H. Adiputra, “Gambaran Keluhan Musculoskeletal dan Kelelahan Sebelum dan Setelah Bekerja pada Pekerja di UD. Batu Bukit,” Jurnal Keperawatan Suaka Insani, vol. 6, no. 1, 2021.
H. Pattiasina, N. P. Markus, and R. Pattiselano, S. R., “Kajian Antropometri Pengrajin Tenun Ikat Khas Maluku,” Simetrik, vol. 11, no. 1, pp. 388–397, 2021.
B. Isma Putra, Ribangun Bamban Jakaria, and “Buku Ajar Perancangan Sistem Kerja dan Ergonomi,” 2020, Buku Ajar.
A. N. Amri and B. I. Putra, “Ergonomic Risk Analysis of Musculoskeletal Disorders (MSDs) Using ROSA and REBA Methods on Administrative Employees Faculty of Science,” Journal of Applied Engineering and Technological Science, vol. 4, no. 1, pp. 104–110, 2022, doi: 10.37385/jaets.v4i1.954.
E. Megawati, W. S. Saputra, Y. Attaqwa, and S. Fauzi, “Abstrak: Tujuan Kegiatan Pengabdian kepada Masyarakat Ini Adalah untuk Mengedukasi Pegurangan Resiko Terjadinya Musculoskeletal Disorders (MSDs) Dini, pada Penjahit Keliling di Ngaliyan Semarang dengan Cara Observasi, Pelatihan Praktis,” Jurnal Budimas, vol. 03, no. 02, pp. 450–456, 2021.
I. Hanom, R. A. Rozefy, and H. T. Filasta, “The Influence of Ergonomics on Working from Home Activities,” Idealog Ide dan Dialog Desain Indonesia, vol. 5, no. 1, p. 58, 2020, doi: 10.25124/idealog.v5i1.3959.
M. Masniar and B. S. Rusli, “Analisa Perancangan Papan Landasan Ergonomis untuk Aktivitas di Kolong Mobil,” Metod. Jurnal Teknik Industri, vol. 7, no. 2, pp. 68–78, 2021, doi: 10.33506/mt.v7i2.1653.
M. Ridwan Malik, M. Alwi, E. Wolok, A. Rasyid, and P. Koresponden, “Analisis Postur Kerja pada Karyawan Menggunakan Metode Rula (Studi Kasus Area Control Room, Joint Operating Body Pertamina-Medco E&P Tomori Sulawesi),” Jambura Industrial Review, vol. 1, no. 1, pp. 2021, 2021, doi: 10.XXXXX/jirev.vXiX.XX-XX.
M. R. H. Wibowo, S. S. Dahda, and A. W. Rizki, “Analisis Postur Tubuh Pekerja pada Stasiun Kerja Pemotongan Pipa untuk Mengurangi Musculoskeletal Disorder (MSDs),” vol. 3, no. 1, 2022.
A. G. Rizaldi and A. S. Cahyana, “Analisa Resiko Postur Kerja Berdasarkan Hasil Evaluasi Menggunakan Metode Quick Exposure Check,” Prozima (Productivity, Optimization, Manufacturing Systems Engineering), vol. 5, no. 1, pp. 51–62, 2021, doi: 10.21070/prozima.v5i1.1350.
D. P. Restuputri, I. Masudin, I. Sekar Ningrum, and A. Putri Septira, “Ebook Ergonomi Industri. UMM 2022,” 2022.
This work is licensed under a Creative Commons Attribution 4.0 International License.