Design and Build a Safe Security System Using RFID With e-KTP as a Tag and Monitoring With IoT-Based Esp32-Cam With Telegram Notifications:

Abdul Adim Ashar; Dwi Hadidjaja Rasjid Saputra

doi:10.21070/ijins.v13i.527

Vol. 13 (2021), Innovation in Mechanical Engineering

Vol. 13 (2021)

Design and Build a Safe Security System Using RFID With e-KTP as a Tag and Monitoring With IoT-Based Esp32-Cam With Telegram Notifications
Rancang Bangun Sistem Pengaman Brankas Menggunakan RFID Dengan e-KTP Sebagai Tag dan Monitoring Dengan Esp32-Cam Berbasis IoT Dengan Notifikasi Telegram

Innovation in Mechanical Engineering

https://doi.org/10.21070/ijins.v13i.527

Published January 31, 2021

Abdul Adim Ashar⁺⁻
Dwi Hadidjaja Rasjid Saputra⁺⁻

Abdul Adim Ashar

Universitas Muhammadiyah Sidoarjo

Indonesia

Dwi Hadidjaja Rasjid Saputra

Universitas Muhammadiyah Sidoarjo

Indonesia

View Article

Suplementary File

Supplementary Files

Similarity Check Result

Keywords

Brankas
Esp32-Cam
IoT
RFID

How to Cite

Ashar, A. A., & Saputra, D. H. R. (2021). Design and Build a Safe Security System Using RFID With e-KTP as a Tag and Monitoring With IoT-Based Esp32-Cam With Telegram Notifications. Indonesian Journal of Innovation Studies, 13, 10.21070/ijins.v13i.527. https://doi.org/10.21070/ijins.v13i.527

Abstract

Security is one form of convenience to protect archives or important objects such as land certificates, BPKB, and many others, and as a place to store these items a safe is created, with the development of technology, the safe is combined with several electronic components, a modern safe is created without a conventional key, only uses radio frequency identification which is already supported with an E-KTP and password to open it, uses a PIR sensor and an esp32 camera to find out who will access the safe and can be monitored every time. time via a smartphone using the telegram application, and also the telegram application can control the alarm if something suspicious is seen from the esp32 camera.

https://doi.org/10.21070/ijins.v13i.527

View Article

Suplementary File

References

Sumardi Sadi dan Muhamad Yoga Mulya Pratama, “Sistem keamanan buka tutup kunci brankas menggunakan bluetooth HC-05 berbasis arduino mega 2560,” 2017.

W. H. dan D. R. I. Mochammad Radja Brojas, “FINGERPRINT BERBASIS ARDUINO , RADIO FREQUENCY IDENTIFICATION DAN KEYPAD UNTUK PINTU,” vol. 4, no. September, 2020.

S. Setyani, “Rancang Bangun Alat Pengaman Brankas Menggunakan Rfid ( Radio Frequency Identification ) Dengan Memanfaatkan E-Ktp Sebagai Tag Berbasis Arduino,” 2016.

A. Setiawan and A. I. Purnamasari, “Pengembangan Passive Infrared Sensor (PIR) HC-SR501 dengan Microcontrollers ESP32-CAM Berbasiskan Internet of Things (IoT) dan Smart Home sebagai Deteksi Gerak untuk Keamanan Perumahan,” Pros. Semin. Nas. Sist. Inf. dan Teknol., pp. 148–154, 2019.

S. A. Cahyo, “Rancang Bangun Pengaman Brankas Menggunakan Fingerprint dan RFID Berbasis IOT dengan Notifikasi Telegram ( Safety Building Design Using IOT Based Fingerprint And RFID With Telegram Notification ),” 2019.

Y. Astuti, “RADIO FREQUENCY IDENTIFICATION ( RFID ) UNTUK KEAMANAN PARKIR SEPEDA MOTOR Di SMK X,” 2015.

R. M. Syafii, M. Ikhwanus, and M. Jannah, “DESAIN DAN IMPLEMENTASI SISTEM KEAMANAN LOCKER MENGGUNAKAN E-KTP,” vol. 7, pp. 24–30, 2018.

E. Supriyadi et al., “PERANCANGAN BANGUN ALAT DETECTOR START FINISH BERBASIS NodeMCU NodeMCU BASED START FINISH DETECTOR DESIGN,” pp. 29–34, 2020.

F. Sirait, J. T. Elektro, F. Teknik, and U. M. Buana, “Sistem Monitoring Keamanan Gedung berbasis Rasberry Pi,” pp. 55–60, 2015.

M. F. Wicaksono, “IMPLEMENTASI MODUL WIFI NODEMCU ESP8266 UNTUK SMART HOME Mochamad Fajar Wicaksono Mochamad Fajar Wicaksono,” vol. 6, no. 1, pp. 9–14, 2017.

H. Hendri, “SISTEM KUNCI PINTU OTOMATIS MENGGUNAKAN RFID ( RADIO FREQUENCY IDENTIFICATION ) BERBASIS MIKROKONTROLER ARDUINO UNO R3,” vol. 4, no. 1, pp. 29–39, 2017.

R. I. O. G. Pratama, “RANCANGAN SISTEM PENGUNCI RUMAH BERBASIS ARDUINO UNO R3 DENGAN RADIO FREQUENCY IDENTIFICATION ( RFID ) DAN SELENOID DOOR LOCK,” vol. 2, pp. 45–50, 2019.

H. Yalandra and P. Jaya, “RANCANG BANGUN PENGAMAN PINTU PERSONAL ROOM MENGGUNAKAN SENSOR SIDIK JARI BERBASIS ARDUINO Hengky Yalandra 1 , Putra Jaya 2 2,” vol. 7, no. 2, 2019.

M. Saleh, “Jurnal Teknologi Elektro , Universitas Mercu Buana ISSN : 2086 æ 9479 Jurnal Teknologi Elektro , Universitas Mercu Buana ISSN : 2086 æ 9479,” vol. 8, no. 2, pp. 87–94, 2017.

T. Octaviany, T. Supriyanto, and Syufrijal, “Sistem Keamanan Loker Barang Berbasis RFID (Radio Frequency Identification) Dengan Pengendali Arduino Uno,” pp. 0–7, 2015.

H. Al Fani, D. Hartama, and I. Gunawan, “Perancangan Alat Monitoring Pendeteksi Suara di Ruangan Bayi RS Vita Insani Berbasis Arduino Menggunakan Buzzer,” vol. 4, pp. 144–149, 2020, doi: 10.30865/mib.v4i1.1750.

Sarmidi and R. A. Fauzi, “Jurnal manajemen dan teknik informatika,” vol. 03, no. 01, 2019.

C. P. Buana, “RANCANG BANGUN SISTEM DETEKSI DINI KEBAKARAN HOTEL SECARA REAL TIME BERBASIS INTERNET OF THINGS.” 2020.

A. N. Trisetiyanto, “Rancang bangun alat penyemprot disenfektan otomatis untuk mencegah penyebaran virus corona,” vol. 3, pp. 45–51, 2020.

A. Putramala, F. Amrullah, Madeleine, I. Halimi, and S. Indrayani, “Pemrograman Modul Kamera Pada Prototipe Mesin Sortir Bungkus Permen Berbasis Image Processing,” vol. 6, pp. 33–34, 2021.

A. Wiyono, A. Sudrajat, F. Rahmah, and U. Darusalam, “Rancang Bangun Sistem Deteksi Dan Pengaman Kebocoran Gas Berbasis Algoritma Bahasa C Dengan Menggunakan Sensor Mq-6,” Konf. Nas. Teknol. Inf. dan Komput., vol. I, pp. 78–85, 2017.

B. S. Haryanto and H. S. Utama, “T E S L A | VOL. 20 | NO. 1 | MARET 2018 | Perancangan Robot Dengan Kemampuan Mencari, Mendekati, Dan Menggiring Bola Ke Gawang,” vol. 20, no. 1, pp. 70–81, 2018.

D. Sasmoko and Y. A. Wicaksono, “IMPLEMENTASI PENERAPAN INTERNET of THINGS(IoT)PADA MONITORING INFUS MENGGUNAKAN ESP 8266 DAN WEB UNTUK BERBAGI DATA,” J. Ilm. Inform., vol. 2, no. 1, pp. 90–98, 2017, doi: 10.35316/jimi.v2i1.458.