Keywords
Technology
Automotive
Development
Productivity
How to Cite
Abstract
The concrete industry, known for producing various concrete products, faces quality challenges evidenced by a 20% defect rate in concrete type G5. SP. 100. 100. 120. 10 MF from August 2022 to January 2023. This study aims to identify the root causes of defects to aid companies in enhancing product quality. Employing qualitative and quantitative methods, including the Seven Tools and Root Cause Analysis (RCA), the research uncovered predominant defects: 681 porous, 312 chipped, 196 cracked, 132 bug hole, 93 shrinkage, 85 lumpy, and 72 other defects. Human, material, machine, method, environmental factors contributed to these defects. Corrective actions were recommended to mitigate defects. The study's limitations include its focus solely on concrete type G5. SP. 100. 100. 120. 10 MF, suggesting future research should encompass all concrete types to provide comprehensive insights for the industry.
Highlight:
- Automotive innovation drives rapid progress in technology and productivity.
- Consumers prioritize quality and quantity in vehicle selection.
- Modified racing rollers enhance motorcycle performance, boosting power and torque.
Keywoard: Innovation, Technology, Automotive, Development, Productivity
References
Ratnadi and E. Suprianto, “Pengendalian Kualitas Produk Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk,” J. Performa, vol. 6, no. 2, pp. 12, 2019.
S. Suharyanto, “Analisis Pengendalian Kualitas Produk Waring Dengan Metode Seven Tools Di Cv. Kas Sumedang,” Tedc, vol. 16, no. 1, pp. 37–49, 2022.
R. A. D. Frestes, “Analisis Penyebab Kerusakan Transformator Menggunakan Metode Rca (Fishbone Diagram And 5-Why Analysis) Di Pt. Pln (Persero) Kantor Pelayanan Kiandarat,” Arika, vol. 16, no. 2, pp. 119, 2022.
A. Merjani and I. Kamil, “Penerapan Metode Seven Tools Dan Pdca (Plan Do Check Action) Untuk Mengurangi Cacat Pengelasan Pipa,” Profis, vol. 9, no. 1, pp. 126, 2021.
S. Fatimah and H. C. Wahyuni, “Product Quality Control UsingSix Sigma MethodsandSeven Toolsin the PDL Shoes Industry,” Tibuana, vol. 06, no. 01, pp. 18, 2023.
E. Haryanto and I. Novalis, “Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin Cnc Lathe Dengan Metode Seven Tools,” Jt, vol. 8, no. 1, pp. 70–75, 2019.
F. Astuti, W. Wahyudin, and F. N. Azizah, “Perancangan Ulang Tata Letak Area Kerja untuk Meminimasi Waktu dan Jarak Aliran Proses Produksi,” Performa, vol. 21, no. 1, pp. 25, 2022.
M. R. Rosyidi, N. Izzah, and T. K. Najahi, “Seven Tools untuk Menurunkan Kecacatan pada Produk Kopi,” J. Optim., vol. 6, no. 2, pp. 142–155, 2020.
K. Damayant, M. Fajri, and N. Adriana, “Pengendalian Kualitas Di Mabel PT. Jaya Abadi Dengan Menggunakan Metode Seven Tools,” Baiet, vol. 3, no. 1, pp. 4, 2022.
I. K. Sari and W. Sulistiyowati, “Redesign Alat Filter Debu Pada Industri Kecil Menengah (IKM) Dengan Mengintegrasikan Reverse Engineering Dan Root Cause Analisys (RCA),” Intech, vol. 3, no. 1, pp. 19, 2019.
Somadi, B. S. Priambodo, and P. R. Okarini, “Evaluasi Kerusakan Barang Dalam Proses Pengiriman Dengan Menggunakan Metode Seven Tools,” Intech, vol. 6, no. 1, pp. 3, 2020.
Suhadak and T. Sukmono, “Peningkatan Mutu Produk Dengan Pengendalian Kualitas Produksi,” Prozima, vol. 4, no. 2, pp. 48, 2020.
Casban and A. P. Dewi, “Upaya Menurunkan Tingkat Cacat pada Pipa Baja dengan Analisis Diagram Sebab Akibat dan Metode 5W+1H,” Baiet, vol. 2, no. 1, pp. 6–10, 2019.
T. Windarti, “Pengendalian Kualitas Untuk Meminimasi Produk Cacat Pada Proses Produksi Besi Beton,” Jati, vol. 9, no. 3, pp. 176, 2019.
Y. Hardiana and N. Suarni, “Kesalahan Umum Dalam Pekerjaan Beton,” 2016.
This work is licensed under a Creative Commons Attribution 4.0 International License.