Abstract
The research conducted at PT. Carma Wira Jatim aimed to optimize the production area layout due to significant challenges stemming from machine delays and material handling inefficiencies. Through systematic layout planning (SLP) and computerized relative allocation of facilities technique (CRAFT), the study proposed improved layouts using Win QSB software. The results indicated differing efficiencies between the CRAFT and SLP methods, with CRAFT demonstrating a 4.5% reduction in total material handling moments compared to the initial layout, suggesting its superiority in this context. These findings underscore the importance of efficient layout design in mitigating production delays and enhancing operational effectiveness. Further research could explore real-time optimization algorithms to adapt layouts dynamically and investigate the impact of layout improvements on overall productivity and resource utilization.
Highlight:
- Improved layout design enhances production efficiency.
- CRAFT demonstrates superior material handling optimization.
- SLP offers systematic planning for layout enhancement.
Keywoard: Production Layout Optimization, SLP, CRAFT, Material Handling Efficiency, Operational Effectiveness
References
R. Fachrizal, “Pengaruh Modal Dan Tenaga Kerja Terhadap Produksi Industri Kerajinan Kulit Di Kabupaten Merauke,” J. Ilm. Agribisnis dan Perikan., vol. 9, no. 2, pp. 66–75, 2016.
A. Hadiguna, R. A, Heri Setiawan, Tata Letak Pabrik. Yogyakarta: Graha Ilmu, 2008.
M. P. Meyers, Fred E. Stephens, Manufacturing Facilities Design and Material Handling (Second Edition). New Jersey: Includes index, 2000.
P. Moengin, “Perbaikan Tata Letak Lantai Produksi Menggunakan Metode Simulasi dan Systematic Layout Planning untuk Meminimasi Waktu Produksi di PT. Lestari Teknik Plastikatama,” J. Tek. Ind., vol. 9, no. 3, pp. 136–144, 2019.
H. Purnomo, Perencanaan dan Perancangan Fasilitas. Yogyakarta: Graha Ilmu, 2004.
Wignjosoebroto, Tata Letak dan Pemindahan Bahan. Surabaya: Guna Widya, 1996.
A. Ristono, Perancangan Fasilitas. Surabaya: Guna Widya, 2010.
S. Wignjosoebroto, Ergonomi Studi Gerak dan Waktu. Surabaya: Guna Widya, 2006.
L. Elvira, B. Suhardi, and R. D. Astuti, “Perancangan Ulang Tata Letak Fasilitas Menggunakan Metode Systematic Layout Planning Pada PT Pilar Kekar Plasindo,” Tekinfo J. Ilm. Tek. Ind. dan Inf., vol. 9, no. 1, pp. 34–46, 2021, doi: 10.31001/tekinfo.v9i1.870.
F. E. Susanto and Rusindayanto, “Analysis of Factory Facility Layout Design Using the Craft Algorithm Method At Pt. Focus on Ciptamakmur Bersama, Blitar,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 3, no. 2, pp. 1–13, 2021, doi: 10.21070/prozima.v3i2.1267.
M. Mudhofar, H. C. Suroso, A. R. Rahadian, and L. N. Sholekhah, “Perancangan Ulang Tata Letak Fasilitas Produksi dengan Menggunakan Metode Systematic Layout Planning dan CRAFT untuk Mengurangi Biaya Material Handling pada PT. Prima Daya Teknik,” no. Senastitan III, 2023.
P. Ulang, T. Letak, M. Metode, P. Tunas, and S. Pacitan, “JURNAL MUHAMMADIYAH RELATIVE ALLOCATION OF FACILITIES TECHNIQUES ) PADA PABRIK,” vol. 4, no. 1, 2023.
E. Rengganis and U. Mauidzoh, “Re-Layout Penempatan Fasilitas Produksi dengan menggunakan Metode Systematic Layout Planning dan Metode 5 S Guna Meminimalkan Biaya Material Handling,” J. Rekayasa Ind., vol. 3, no. 1, pp. 31–40, 2021, doi: 10.37631/jri.v3i1.289.
S. N. Irrawan, R. A. Simanjuntak, and M. Yusuf, “ISSN : 2338-7750 Institut Sains & Teknologi AKPRIND Yogyakarta Jurnal REKAVASI ISSN :,” J. REKAVASI, vol. 7, no. 1, 2019.
D. R. Kiran, “Systematic layout planning,” Prod. Plan. Control, pp. 279–292, 2019, doi: 10.1016/b978-0-12-818364-9.00019-6.
A. Rahmawan and O. Adiyanto, “Perancangan Ulang Tata Letak Fasilitas Produksi UKM Eko Bubut dengan Kolaborasi Pendekatan Konvensional 5 S dan Systematic Layout Planning (SLP),” J. Hum. Teknol., vol. 6, no. 1, pp. 9–17, 2020, doi: 10.34128/jht.v6i1.72.
P. S. Akuntansi, “1* , 2 1,2,” vol. 20, no. 1, pp. 105–123, 2022.
P. Brothers, T. Boyolali, F. T. Kebela, B. Suhardi, C. N. Rosyidi, and I. Adiasa, “Perbaikan Tata Letak Fasilitas Produksi Incoming Material Menggunakan Systematic Layout Planning,” vol. 19, no. 1, pp. 77–84, 2020, doi: 10.20961/performa.19.1.40093.
This work is licensed under a Creative Commons Attribution 4.0 International License.