Keywords
Ball Turning Attachment
Machining efficiency
Tool optimization
Experimental procedures
How to Cite
Abstract
This study explores the development of a Ball Turning Attachment for lathes to enhance efficiency in manufacturing spherical workpieces. Utilizing materials such as ST 37 and ST 42, the research focuses on the machining processes of milling, drilling, and turning. Despite theoretical estimations suggesting a total work time of 8 minutes 23 seconds, actual implementation records a duration of 12 minutes 23 seconds, highlighting a significant knowledge gap. Experimental procedures conducted in lathe workshops reveal discrepancies between theoretical and actual work times, influenced by factors like feed depth and manual drilling processes. Findings underscore the importance of optimizing tool design and feed rates to improve machining efficiency, offering practical insights for enhancing lathe manufacturing processes and productivity.
Highlight:
- Develop Ball Turning Attachment for lathe manufacturing efficiency.
- Address discrepancies between theoretical and actual work times.
- Extract practical insights for enhancing lathe manufacturing processes.
Keyword: Lathe manufacturing, Ball Turning Attachment, Machining efficiency, Tool optimization, Experimental procedures
References
A. Ansyori, "Pengaruh kecepatan potong dan makan terhadap umur pahat pada pemesinan freis paduan magnesium," Mechanical, vol. 6, no. 1, 2015.
S. Anwar, "Usulan penerapan total productive maintenance (TPM) untuk meningkatkan efisiensi pada mesin bubut fuji NO. 2 di PT. XYZ," Universitas Bhayangkara Jakarta Raya, Dissertation, 2017.
B. Siswanto, "Pengaruh kecepatan dan kedalaman potong pada proses pembubutan konvensional terhadap permukaan lubang," Dinamika Vokasional Teknik Mesin, vol. 3, no. 2, pp. 86, 2018.
S. D. Hindom, R. Poeng, and R. C. Lumintang, "Pengaruh Variasi Parameter Proses Pemesinan Terhadap Gaya Potong pada Mesin Bubut Knuth DM-1000A," Jurnal Poros Teknik Mesin UNSRAT, vol. 4, no. 1, 2015.
C. B. Koentjoro, G. T. K. Adjie, and M. N. N. S. Putra, "Perancangan ulang turret tambahan mesin schaublin 128-cnc," in IMDeC, 2020, pp. 101-109.
Paridawati, "Pengaruh kecepatan dan sudut potong terhadap kekasaran benda kerja pada mesin bubut," Jurnal Imiah Teknik Mesin, vol. 3, no. 1, 2015.
W. Raul, Y. Poppy, "Pengaruh variasi kecepatan potong dan kedalaman potong pada mesin bubut terhadap tingkat kekasaran permukaan benda kerja ST 41," Jurnal Teknik Mesin, pp. 7-8, 2016.
R. Rusdin, P. B. Santoso, and D. B. Darmadi, "Rekayasa sistem informasi manajemen perawatan mesin perkakas di laboratorium proses manufaktur jurusan teknik mesin Universitas Brawijaya," Jurnal Rekayasa Mesin, vol. 9, no. 2, pp. 109-118, 2018.
B. Suroso and D. Prayogi, "Pengaruh kecepatan putaran spindle dan kedalaman penggerindaan terhadap kekasaran permukaan material baja ST 37 menggunakan mesin bubut bergerinda," Jurnal Rekayasa Material, Manufaktur dan Energi, vol. 2, no. 1, pp. 24-33, 2019.
S. Ihsan and B. H. Sobar, "Analisa pengerjaan tirus terhadap permukaan benda uji bahan S45C dari variasi putaran dan sudut potong mesin bubut krisbow KW 15-604," Jurnal Teknik Mesin Indonesia, vol. 11, no. 2, pp. 94-97, 2016.
This work is licensed under a Creative Commons Attribution 4.0 International License.